ValueJet 1938TX

The Mutoh Textile Pigment Inks are suitable for printing direct to both man-made textiles like polyester and lycra; and natural fibres, such as cotton. There’s no need for messy finishing processes.  Printed fabrics can be finished after printing using heat fixation or a calender heat press. 

The VJ-1938TX can print direct to fabrics without the need to use a paper transfer method. Mutoh pigment inks give you printing opportunities that are not normally available via sublimation printing, such as cotton and other natural fibres.

Suitable for production runs and yardage, the VJ-1938TX is at its best producing apparel, clothing, home furnishing textiles and custom interior designs; as well as trade show graphics, flags, banners, and more.

The VJ-1938TX includes a dedicated, sensor-driven front and rear feed mechanism, purpose -made for fabrics. This provides tensioning across the width of the printer as the media enters the print area.

The VJ-1938TX is designed with advanced features that increase productivity and quality, such as Mutoh’s Dropmaster Technology that reduces the need to continually do bidirectional alignments as is the norm on other less cable machines; and Intelligent Interweave (I2) print technique that virtually eliminates banding.

  • Eight colour, 75 inch (1910 mm) direct to textile printer

  • Mutoh genuine textile pigment ink: CMYKOBGK or 2x CMYK

  • Prints to coated polyester or pre-treated cotton and other natural fibres – one inkset* 

  • Sliding platen cover makes printing to open weave media easy

  • Dual, staggered head setup with latest generation 1440 nozzle Piezo heads

  • Built-in fabric transport system with sensor driven front/rear tensioning

  • The textile tensioning cylinder is placed close to the platen to ensure even pressure across the width of the media

  • Head height can be set up to 6mm to allow for long fibre fabrics

  • Open RIP software architecture, supported by all major RIP vendors

  • Speed – 360×360 dpi: 41.0 m²/h

  • Speed Production – 360×720 dpi: 22.0 m²/h

  • Production – 720×720 dpi: 11.0 m²/h

  • Quality Production – 720×1080 dpi: 8.5 m²/h

Print Method Drop-On Demand Piezo Drive Method
Number of Nozzles Two heads in staggered arrangement (180 nozzles x 8 rows each)
Ink Aqueous: Pigment and Dye Sublimation
Color Options High speed: 2 x CMYK | Extended gamut: CMYK + Orange, Green, Blue, Black
Minimum droplet size 3.3 pl
Variable dot Yes
Print Modes 1440/1080/720/540/360 dpi
Head Height Low: 2.5mm | Medium: 3.5mm | High: 6.0mm
Maximum Media Width 1910mm (75″)
Maximum Media Core Width 2000mm (78.75″)
Maximum Print Width 1900mm (74.8″)
Maximum Media Thickness 1.3, 2.3, 3.5 mm (according to head height)
Max Media Roll Weight 100 kg
Media Roll Diameter/Core 250mm diameter on a 3″ (75mm) or 2″ (50mm) core
Media Transport System Sensor driven front and back tensioning systems
Fabric Unwinding Supports Face-in and Face-out roll fabrics
Fabric Winding Face-in: Tension only | Face-out: Tension or slack
Printer Dimensions (W)2983 x (D)1134 x (H)1261 mm
Printer Weight 349 kg
Operating Temperature 22-30°C with t: max. Δ2°C/h
Operating Humidity Range 40% – 60% (no condensation) with RH: max. Δ5% RH/h
Power Requirements 200-240V at 50Hz
Power Use During Printing: <=360W | Stand-by: 60W
Warranty 1 Year
  • Long run textile yardage for home furnishings and décor fabrics

  • Fashion / Apparel: boutique clothing, outdoor wear, training wear

  • Soft signage and graphics for events, trade shows, sports grounds, flags and pennants

  • Backlits, fine art prints 

  • Production houses requiring print quality at high speeds and amazingly high resolutions

  • Open and closed weave fabrics – non stretch and limited stretch

Translate »