GRANDO GD-1600C
- Max cutting width
- 1.6 Meters (63 inches)
- Drive motor
- High-speed, micro-step digital servo motor system
- Cutting force & speed
- Up to 1000g force and 1200mm/s acceleration speed
On request
GCC Expert II
On request- Models
- EX II-24, EX II-24LX, EX II-52, EX II-52LX
- Max cutting width
- 600 mm (EX II-24), 1320 mm (EX II-52)
- Max cutting force
- 350 g
- Max cutting speed
- 705 mm/s (EX II-24), 635 mm/s (EX II-52)
- Questions about this model
- +389 2 313 5050
- Manufacturer's page
- gccworld.com
After-sales support
- Service
- Installation
- Parts
- Training
Description
The GCC Expert II is an entry-level vinyl cutter, the model GCC recommends for people new to sign making. It comes in two widths: the EX II-24 cuts up to 60 cm and the EX II-52 up to 132 cm. Cutting force goes up to 350 g and speed up to 705 mm/s. The LX versions add the AAS II optical sensor, which reads registration marks on a printed sheet so the cutter follows the print. It connects over USB or serial, and the Windows driver sends jobs straight from CorelDRAW. GCC guarantees straight tracking over 3 metres of vinyl.
Specifications
| Models | EX II-24, EX II-24LX, EX II-52, EX II-52LX |
|---|---|
| Max cutting width | 600 mm (EX II-24), 1320 mm (EX II-52) |
| Max cutting force | 350 g |
| Max cutting speed | 705 mm/s (EX II-24), 635 mm/s (EX II-52) |
| Contour cutting | AAS II, LX models only |
| Connectivity | USB, serial (RS-232) |
| Guaranteed tracking | 3 m |
More models
GCC Puma IV
- Models
- P4-60, P4-60LX, P4-132, P4-132LX
- Max cutting width
- 600 mm (P4-60), 1300 mm (P4-132)
- Max cutting force
- 500 g
On request
GCC Jaguar V
- Models
- J5-61, J5-101, J5-132, J5-163 (also as LX), J5-183LX
- Max cutting width
- 610, 1016, 1320, 1627 or 1830 mm
- Max cutting force
- 600 g
On request
GCC Jaguar VI
- Models
- J6-61, J6-101, J6-137, J6-163, J6-183 (each also as WF with Wi-Fi)
- Max cutting width
- 618, 1018, 1380, 1633 or 1838 mm
- Max cutting force
- 700 g
In stock